IM-P537-01
EMM Issue 1
14
Pressurised Thermophysical deaerator with operator manual for the control unit
2.2.1 Example of nameplate
The unit has an identification plate fastened to the frame. All identification data such as model, factory number
and year of construction are summarized on the nameplate.
N.B. all correspondence concerning the unit must include the above-mentioned data.
The design conditions (circuit pressure and temperature), weight, fluid group and device category are also
specified.
Fig. 3
Note:
the above-mentioned nameplate refers to a CSG; it is necessary to have the PDA's
nameplate given by the U.T
2.2.2 Labelling (EC Directive)
Depending on the residual risks such as the risk of burns, risk of electric shock and the requirements,
prohibitions and instructions to be followed for operation, the following pictograms readable at 1 metre from
the assembled unit are placed:
Danger
Electrical
current
Dangerous
temperature
