Spinning spinner AERO, Owner'S Manual

Page: 23 / 26

SPINNER
®
AERO OWNER’S MANUAL
www.spinning.com 800.847.SPIN (7746)
23
TROUBLESHOOTING
RATTLING HANDLEBARS OR SEAT TOWER
Make sure that the pop-pin knobs are
correctly locked into place and tightened.
SADDLE PAIN
Check to ensure that the saddle is centered
and level. Adjust the level as necessary
using the outside bolts
(shown in RED)
.
Remember that it does take time for a
body to acclimate to the saddle. A padded
gel seat cover and/or cycling shorts
can make your ride more comfortable.
The SPD pedals are set for the lowest release
tension at the factory for safety. If you would
like a stronger release tension, use a 3mm
allen wrench and turn the adjustment screw
clockwise. Adjust both the left and right
sides evenly and start with as little adjustment
as necessary until you achieve the desired
release tension.
PEDAL ADJUSTMENTS
Take the time to enter your Spinner® bike serial number in the space
below (the serial number is located on the bottom crossbar). If parts
are missing or if you have any assembly questions, please contact
customer service at 888.704.SPIN (7746).
Serial No. : ____________________________________________