Spinning spinner AERO, Owner'S Manual

Page: 21 / 26

SPINNER
®
AERO OWNER’S MANUAL
www.spinning.com 800.847.SPIN (7746)
21
Safety Precautions
Install the tablet mount securely. Do not adjust the tablet or tablet mount while pedaling. Remove the tablet before moving your
indoor cycle and do not place direct force on the tablet mount. Mad Dogg Athletics, Inc.® is not responsible for any injuries or
damages caused to any person or item during the installation or use of this tablet mount.
9
8
.
STEP 5: INSTALL THE PEDALS
Turn the resistance knob clockwise until the
crank arms are immobilized. Remove the
pedals from the packaging. Install the
left
pedal
on the
left crank
. Use the multi-wrench
supplied and turn
counterclockwise
to
tighten. Install the
right pedal
on the
right
crank
. Use the multi-wrench supplied and
turn
clockwise
to tighten.
Remember, pedals
are always tightened by turning the wrench
over the top of the spindle towards the
front of the bike.
Be sure both pedals are
tightened securely.
STEP 6: LEVEL THE BIKE
Move the bike to the location where it will be
used. Your Spinner® Bike requires 39.5” of
unobstructed clearance space around every
portion of the bike for proper operation. Make
sure to set the bike up on a level surface.
Rock the bike gently to check for wobble.
If needed, use the leveling adjusters under
the front and rear stabilizer bars to steady
the bike.
NOTE: The pedal spindles and cranks
are marked “L” (left) and “R” (right).
Left and right are referenced from a
seated position on the bike with the
flywheel facing forward. Be sure to
install the pedals on the correct side
of the bike.