Spinning spinner AERO, Owner'S Manual

Page: 19 / 26

SPINNER
®
AERO OWNER’S MANUAL
www.spinning.com 800.847.SPIN (7746)
19
SPINNER
®
BIKE ASSEMBLY
STEP 1: Unpack the carton
Open the shipping carton and remove all of the parts. Make sure that
the following parts are included and that no damage has occurred
during shipping:
• Bike frame with flywheel
• Front stabilizer bar with
transportation wheels
• Rear stabilizer bar
• Handlebars
• Handlebar post
• Pedals
• Seat slider and saddle
• Seat post • Blister card for assembly and
maintenance includes: Multi-wrench,
3mm / 4mm / 5mm / 6mm Allen
wrenches, each 1pc. M6X15 inner
hex bolt 1pc., M8X16 inner hex bolt 2pcs,
hex socket bolt 4pcs, flat washer 8 pcs.
• Owner’s manual
• Tablet holder set
• Tablet arm Set (with assembly bolts)
• Dual water bottle holder set (with
assembly bolts
STEP 2: ATTACH THE STABILIZER BARS
Have someone help you tilt the bike forward
and stabilize it while you remove the rear
plastic shipping guard. Lift the back of the
bike and remove the front plastic shipping
guard . It is normal to see cracking in the
shipping guards as they protect the frame
in transit. Have someone help you tilt the
bike forward (toward the flywheel) so that
you can attach the rear stabilizer bar from
the underside with the provided bolts and
washers. Line up the holes in the stabilizer
bar with the holes in the frame. Using the
included wrench tighten the bolts (with
washers) securely. Repeat the process with
the front stabilizer bars.
STEP 3: INSTALL THE SADDLE
While holding and pulling back the seat post
pop-pin knob, slide the seat post into the
seat tube. Release the pop-pin knob. Adjust
the seat post to make sure the pop-pin is
properly engaged. Tighten the seat post
pop-pin knob securely. Now unscrew, pull
out and hold the seat slider pop-pin knob.
Slide the seat slider all the way into the seat
tube. Release the seat slider pop-pin knob.
Adjust the seat slider (fore/aft) to make sure
the pop-pin is engaged. Tighten the seat
slider pop-pin knob securely.
3
1
seat slider
seat post
pop-pins
knobs
2