19/11/2013
Vers. 1.1
27
12. Utility
The utility menu contains the following functions:
12.1.
Level
With this function you can add oil in the car to reach the correct oil level.
Place the plastic probe in the 'Pressure' pipe.
Pressing the UP arrow key, oil is inserted into the car.
12.2.
Recirculation
Completely similar to the recirculation phase which is activated at the end of work.
After connecting the vehicle to the ATF, the desired time is set for the recirculation. Then press
ENTER to start the phase.
This phase can be used to bring the oil to temperature or to verify that the connection of the fittings
is done correctly.
12.3.
Used oil drain
This function unloads the used oil tank inside the ATF.
From the home screen or from the internal tank level control on the side you can see how much
oil is in the tank. The station has a control device that does not allow you to perform oil
replacements if the tank is overfilled.
It is advisable to always keep an eye on the amount of oil in the used oil tank.
Oil removal occurs through the appropriate exhaust pipe, located on the side.
12.4.
With this function, the user can print the specifications of the last performed operation, both manual
and automatic.
The printed report indicates:
Whether you inserted the additive or not
Whether you performed the washing
Whether you replaced the filter (in manual)
How much oil has been replaced
