19/11/2013
Vers. 1.1
24
10. AUTOMATIC Procedure
This procedure is used if the automatic transmission filter is not replaced.
You must connect the car as shown in the previous chapter, set the parameters and follow the instructions on the
screen.
Select the 'AUTOMATIC' procedure with the icon below.
You will enter the following screen, where you can set the parameters for each phase and start the
procedure.
To set each step:
Move to the icon representing the desired phase
Press ENTER.
Set the desired parameter
o
Cleaning Additive: Yes/No (A)
o
Washing: washing time (minutes) (B)
o
Oil to be replaced: the amount of oil in the gearbox (C)
o
With the Go button you can start the whole procedure (D)
With function A you can choose whether to insert or not the washing additive, prepared in the bottle as shown in
the chapter of the previous section.
With function B you can choose how many minutes of washing to perform.
With function C you can select how much oil you want to replace.
Press the GO key (D) to start the procedure.
You will see the following sequence of screens that will indicate the operations to perform on the car.
Once the automatic procedure has been started, the user will only work on the car as shown on the display during
the different phases.
Once the full procedure is completed, the station will be placed on recirculation, waiting for the user to intervene.
This procedure can be interrupted at any time by pressing the Red C button on the keyboard.
