19/11/2013
Vers. 1.1
15
7. Preparing of the Station
IMPORTANT
THE STATION MUST BE CONNECTED TO AN ELECTRICAL OUTLET PROTECTED FROM INDIRECT CONTACT IN
ACCORDANCE WITH THE RULES IN FORCE IN THE COUNTRY OF USE
ENSURE THAT THE MAINS VOLTAGE IS AS INDICATED ON THE RATING PLATE NEAR THE OUTLET
7.1.
Preparing the oil
Insert into the new oil tank a sufficient amount of oil specific for ATF (at least 2 lt more than the total quantity
present in the transmission).
Check on the display the total amount of used oil in the internal tank of the ATF, ensuring that there is sufficient
space for oil recovery.
To drain the used oil in the internal tank see para. 12.3
7.2.
Preparing the washing fluid
In order to wash the gearbox you need to insert the appropriate fluid into the small back tank of the ATF.
Note. We do not recommend washing very old automatic transmissions (cars with more than 150.000 km).
Remove the small washing fluid tank from the ATF.
Insert the washing fluid mixing it with gearbox oil (ratio 1:1)
Insert the quick coupling of the bottle into its seat.
Figure 18 - Washing fluid
