33
Special parameters
This section presents an advanced interface window that can be used to adjust the
sensitivities and offsets of various sensors on the mill.
WARNING
: Changing these parameters should only be done by trained
personnel. Incorrectly setting these parameters could cause damage to the unit.
Accessing the
Special
parameters
To invoke the Special parameters window, Press on the
“
Special
Parameters
”
icon shown here, located between the Grinding stage
Icons of the main screen.
(The padlock icon must be in unlocked position to see the
“
Special
Parameter
”
icon that will allow to reach this screen. See
on page 28 for details.)
The following window appears:
