25
Sampling and Recording in Schedule Mode
1. Disconnect the USB cable from the computer and
monitor. Place the monitor in the desired location
for sampling.
2. At the scheduled start date and time, the green LED
will flash to indicate that the logger is recording data.
3. The datalogger will record up to 32,000 data points.
Once the scheduled stop date and time are reached,
recording will stop.
Sampling and Recording In Key Start Mode
1. Disconnect the USB cable from the computer and meter.
Place the meter in the desired location for sampling.
2. At the desired start date and time, press and hold the Key
Start Button for 3-5 seconds. The green LED will flash to
indicate that the logger has started recording data.
3. The datalogger will record the number of data points
formerly set up in the software (see page 24).
4. To stop the session early, press and hold the Key Start
Button again for 3-5 seconds.
