31
►
Read out the fault codes with the Spelsberg wallbox app:
•
Via NFC (Pure and Smart Pro) See 14.1. Reading out faults (Pure wallbox)., page 31
•
Via LAN / WLAN (Smart Pro only) See 14.2. Reading out faults (Smart Pro wallbox), page31
14.1.
Reading out faults (Pure wallbox).
►
Open the Spelsberg wallbox app.
►
Select the wallbox in the app.
►
Open the menu item “System”
→
“Messages”.
►
Hold the smartphone up to the RFID logo on the wallbox when prompted to do so by the app.
9
The status of the wallbox is read out.
14.2.
Reading out faults (Smart Pro wallbox)
Note
The smartphone and the wallbox must be in the same network in order to read out the faults
directly in the app. If the smartphone and the wallbox are not in the same network, the fault
can be read directly from the wallbox (See 14.1. Reading out faults (Pure wallbox)., page 31).
►
Open the Spelsberg wallbox app.
►
Open the menu item “System”
→
“Messages”.
14.3.
Unlocking the charging plug in an emergency
See the owner’s manual of the electric vehicle.
15.
Repair
15.1.
Safety
Warnung
Risk of fatal electric shock
There is a risk of electrocution when working on the electrical components of the wallbox.
►
All work on the electrical components of the wallbox must be carried out by a locally
certified electrician.
►
Observe the following safety rules before any work on electrical components:
–
Disconnect the power supply.
–
Secure it against being switched on again.
–
Check that all poles are de-energised.
–
Earth and short-circuit.
–
Cover or enclose adjacent live parts.
15.2.
Contact / service
If you have any questions about the wallbox and electromobility, visit our website:
www.spelsberg.com
The Service and Support section
https://www.spelsberg.com/service/support/wallbox/
contains a wide range
of information.
If you would like to contact us directly about a specific question, please use the contact form on our website.
