23
10.5.2.
Network connection via WLAN
►
Start the app.
►
Select the menu item “Add wallbox to app”.
►
Read the provided setup QR code with the smartphone. After a successful initial setup, the setup QR code
will no longer need to be scanned.
►
Select the network to which you want to connect the wallbox.
►
Enter the WLAN password.
►
Transmit the data to the wallbox via NFC. The smartphone must be held near the RFID logo on the
wallbox for this.
9
The set parameters are transmitted to the wallbox.
9
If the smartphone is in the same WLAN as the wallbox, it will be detected by the app and the network
setup is complete.
10.6.
Configuring applications (Smart Pro only)
Warnung
The user does not have restricted access rights and can therefore set all parameters.
►
Technical values may only be set by a qualified electrician.
10.6.1.
Configuring load management
Dynamic load management (DLM) enables multiple charging points to be operated on a limited grid
connection. This means that within the charging network, the charging power of individual charging points
is reduced in order not to exceed the maximum load, or to distribute the load to different phases.
Optimal load management depends on the capacity of the grid connection, the use of phase rotation when
connecting the charging point and the way the charging network is configured.
►
Select the menu item “System”
→
“Settings”
→
“Advanced settings”
→
“Load management”.
Note
For more information on load management, visit the Spelsberg website.
10.6.2.
Energy management system
The Spelsberg wallbox can be integrated into an energy management system. This will adjust the charging
process according to the available energy.
►
Select the menu item “System”
→
“Settings”
→
“Advanced settings”
→
“Energy management systems”.
►
Adjust the parameters according to the conditions (e.g. teach-in of EEBUS system).
Note
For more information on energy management, visit the Spelsberg website.
