15
9.6.
Connecting the charging cable
Fig. 12: Connecting the charging
cable
►
Unfasten the strain relief.
►
Feed the charging cable through the bottom right DMS M25 and the strain relief clamp.
►
Pull the charging cable back slightly so that the DMS forms a downward funnel. The sheath of the cable
must still protrude at least 1 cm from the strain relief.
►
Tighten the strain relief (tightening torque: 0.9 Nm).
►
Make sure that the charging cable cannot be pulled out of the strain relief.
Fig. 13: Connecting the charging cable
►
Connect the charging cable (Fig. 13).
2.
1.
>1 cm
3.
4.
PE
CP
N
L3
L2
L1
