22
Warnung
The user does not have restricted access rights and can therefore set all parameters.
►
Technical values may only be set by a qualified electrician.
►
Start the app.
►
Select the menu item “Add wallbox to app”.
►
Scan the provided setup QR code with the smartphone to save the wallbox data in the app. After a
successful initial setup, the setup QR code will no longer need to be scanned again.
►
Set up the wallbox according to the procedure in the app.
►
Transfer the data to the wallbox via NFC when the configuration is complete. The smartphone must be
held near the RFID logo on the wallbox for this.
10.4.
Setting the charging current
The charging current of the wallbox can be set by the user:
The charging current can be set for the current charging process.
►
Select the menu item “System”
→
“Settings”
→
“Charge current limit”
→
“Charging process”.
If load management is active, the charging current can be automatically distributed to different charging
points.
With active energy management (EMS), this can specify the available charging current so that the
wallbox does not provide too much energy.
►
Select the menu item “System”
→
“Settings”
→
“Advanced settings”
→
“Installation”.
►
Follow the instructions in the app.
10.5.
Setting up the Smart Pro wallbox in a network
Note
The Smart Pro wallbox can be integrated into the existing IT infrastructure either via LAN cable
(recommended) or via WLAN.
A network connection can be set up for the Smart Pro wallbox.
The network setup is necessary in order to use the full range of functions.
10.5.1.
Network connection via LAN
Note
To set this up, the smartphone and wallbox must be in the same network.
►
Start the app.
►
Select the menu item “Add wallbox to app”.
►
Scan the provided setup QR code with the smartphone to save the wallbox data in the app. After a
successful initial setup, the setup QR code will no longer need to be scanned.
►
Deactivate the “Set up WLAN” option.
►
Follow the instructions in the app.
►
Transmit the data to the wallbox via NFC. The smartphone must be held near the RFID logo on the
wallbox for this.
9
The set parameters are transmitted to the wallbox.
