Spektrum NX8 Instruction Manual Download

Page: 5 / 54

SPEKTRUM NX8 • TRANSMITTER INSTRUCTION MANUAL

The NX8 transmitter has an internal charger that is powered from

any common Micro USB power supply.

CAUTION:

Never connect an external battery charger to

your NX8 transmitter.

Always charge the transmitter on a heat-resistant surface.

1. Power off your transmitter.
2. Connect the power supply to a power outlet using the

appropriate adapter.

3. Connect your micro USB cable to the charge port located on

the back of the NX8.

4. Disconnect the transmitter from the power supply once

charging is complete and disconnect the power supply from

the power outlet.

CAUTION:

Never leave a charging battery unattended.

CAUTION:

Never charge a battery overnight.

Battery Alarm

The System Settings Screen allows you to change the battery type

and low voltage alarm settings. See “System Settings” for more

information.

• An alarm will sound when the battery reaches the low voltage

limit. If this happens in flight, land immediately and recharge.

The NX8 transmitter has internal memory that enables you to

connect to your NX8 for file transfers directly through the Micro

USB connector. The USB port may be used at any time to charge

the battery, but to connect to the internal memory, you will need to

observe the following steps.

1. Connect your micro USB cable to the Micro USB connector

located on the back of the NX8.

2. Enter the Function menu and Scroll to the bottom to access the

System menu.

3.  Scroll down and select USB Settings.
4.  Select Access Internal Storage.
5.  Transfer your files between the NX8 and your PC as needed.
6.  Click back or the roller to exit and resume normal operation.

The NX8 transmitter has a WiFi capabilities to enable you to

download updates from the SpektrumRC.com website. You must

start an account at SpektrumRC.com first on your PC, Mac, or

mobile device before you can connect with your NX8

1. Power ON your NX8 and enter the Function menu, Scroll to the

bottom to access the System menu.

2. Scroll down and select Check For Updates. The NX8 will search

for WiFi networks in range and display the options for you to

connect with.

3. Select your WiFi connection. Load the SSID and password for

connection and select Connect.

4. Select Log In and fill in your account information.
5. Select Check For Updates to check for the newest updates on

your NX8, and download them automatically.

6. If you wish to erase your registration information from your NX8

you may do so. Otherwise, select Log Out to resume normal

operation.

CHARGING THE LITHIUM ION BATTERY PACK

CONNECTING THE USB TO A PC

UPDATING WITH WIFI

Summary of Contents for NX8























































Search results

Summary of Contents for NX8

Reviews:

Related manuals for NX8

Brands by name

Popular brands

Spektrum NX8, Instruction Manual

Search results

Summary of Contents for NX8

Reviews:

Related manuals for NX8

Brands by name

Popular brands