Spektrum NX8 Instruction Manual Download

Page: 41 / 54

SPEKTRUM NX8 • TRANSMITTER INSTRUCTION MANUAL

If you enable a wing type with two aileron servos, the function

menu will have a Differential menu added. This feature is intended

for you to be able to set the ailerons for equal travel, or to be able

to set them for more up travel than down travel, depending on your

aircraft and intentions.

To use the Differential System:

1. Select the switch you want to use. If you want to use one

setting full-time, set the Switch to ON.

2. Set your values to achieve your desired results. Positive and

negative values will have an opposite effect.

If you enable a

V-Tail

tail type, the function menu will have a

V-Tail Differential

menu added. This feature is intended for you

to be able to set the control surfaces for equal travel, or to be able

to set them for more up travel than down travel, depending on your

aircraft and intentions.

To use the V-Tail Differential System:

1. Select the switch you want to use. If you want to use one

setting full-time, set the Switch to ON.

2. Set your values to achieve your desired results. Positive and

negative values will have an opposite effect.

Gyro menus can be used to control a gain value. Enable the

menu you wish to use in the

Aircraft Type

Aircraft Options

selection in the

System Menu.

3-Axis Gyro

Select the Channel and switch you want to use and fill in your gain

values in the switch positions.

Gyro (1,2,3)

This menu selection can give you more finite control over gain

values along specific points of input. Select your input channel

and your gain channel, and fill in the values you want to use. move

the input channel and press Ad Pt. to add a point along the curve.

select a different Curve (page) to store multiple sets of values for

testing.

Differential

V-Tail Differential

Gyro Menus

Summary of Contents for NX8























































Search results

Summary of Contents for NX8

Reviews:

Related manuals for NX8

Brands by name

Popular brands

Spektrum NX8, Instruction Manual

Search results

Summary of Contents for NX8

Reviews:

Related manuals for NX8

Brands by name

Popular brands