Spektrum NX8 Instruction Manual Download

Page: 22 / 54

SPEKTRUM NX8 • TRANSMITTER INSTRUCTION MANUAL

The System Settings menu consists of four screens:

System Settings, Extra Settings, Serial Number and Calibrate.

Select

to move between screens.

The User Name field displays your name in the lower right corner

of the main screen.

To Program a User Name:

1. Scroll to User Name and press the scroll wheel. The User

Name screen appears.

2. Scroll to the desired character position and press the scroll

wheel. Scroll left or right to change the character and press

the scroll wheel to save the selection. The User Name can

contain a maximum of 20 characters, including spaces.

3. Press the Back button to save the User Name and return to

the System Settings screen.

The Backlight field adjusts the backlight appearance time and bright-

ness. You have the option to turn the backlight off for models you fly

during the day and turn the backlight on for night flying models.

The backlight time options are:

Off:

Appears for a short time when you power on the transmitter.

On:

The backlight is always on.

Set Time:

The backlight is on for 3, 10, 20, 30, 45 or 60

seconds before automatically turning off. Press the scroll

wheel once to turn the backlight on.

The backlight percentage adjusts the backlight intensity and it

is adjustable in 10% increments from 10% (darker) to 100%

(brighter).

SYSTEM SETUP

SYSTEM SETTINGS

Palette Utilities

User Name

Backlight

To change the gimbal stick mode:

1. Scroll to Mode and press the scroll wheel.
2. Scroll left or right to change the gimbal stick mode. Press the

scroll wheel to save the selection.

3. Select NEXT in the lower left corner until the Calibration

screen appears.

4. Move all transmitter controls to the center position and

complete the calibration process before exiting the System

Settings menu. See “Calibrating Your Transmitter” for more

information.

*For more information, see Physical Transmitter Adjustments

in the back of the manual.

The Battery Alarm is set to LiIon battery type for the NX8 and

cannot be changed. The alarm activates when the battery reaches

the low voltage limit.

To change the battery voltage trigger point for the alarm:

1. Scroll to the battery voltage and press the scroll wheel. Turn

the scroll wheel left or right to change the voltage level. Press

the scroll wheel again to save the selection.

Battery Alarm

Mode

The colors on the NX8 may be customized as you wish. Select

from the pre-defined color options listed under Global Customized,

or select Personalize to create your own RGB color scheme.

Summary of Contents for NX8























































Search results

Summary of Contents for NX8

Reviews:

Related manuals for NX8

Brands by name

Popular brands

Spektrum NX8, Instruction Manual

Search results

Summary of Contents for NX8

Reviews:

Related manuals for NX8

Brands by name

Popular brands