16
Spektrum DX5r • tranSmitter inStruction manual
EN
TRACTION
Traction Control helps reduce wheel slippage and improve acceleration by gradually increasing the throttle.
TRIM SETUP
Trim Setup affects the amount the servo travels with each click of the trim, but has no effect on the total trim
travel. The trim steps range from 1 to 20 (Default is 9).
To adjust the trim steps:
ChANNEl ASSIGN
Channel Assign allows for the assigning of a switch or trimmer as input to an Aux channel.
Channel assign:
TRIM ASSIGN
Trim ASSIGN allows for the assigning of a switch to the Steering or Throttle trims.
Options:
• Point:
The throttle position that traction control disengages (5 to 100, default is 50).
• Speed:
The time after pulling the trigger traction control engages (1 to 100, default is 10).
To activate Traction:
1.
Assign a switch to toggle Traction ON/OFF.
2.
Select functions to edit.
3.
Select the On The Fly (OTF) switch to edit settings with out going into the Traction menu.
4.
The bar at the bottom of the screen displays the parameters and shows how Traction will function.
Deactivating Traction:
•
Assign switch to INH.
1.
Select channels to edit.
2.
Scroll Up or Down to adjust the step value.
3.
Click the scroll wheel to save the selection.
1.
Select a channel to edit. Click the scroll wheel to save the selection.
2.
Scroll Up/Down or toggle a switch/button to assign.
3.
Click the scroll wheel to save the selection.
1.
From within Trim Setup, select NEXT.
2.
Select channels to assign a switch to.
3.
Scroll Up/Down or toggle a switch/button to assign.
4.
Click the scroll wheel to save the selection.
FUNCTION lIST