19
Spektrum DX5r • tranSmitter inStruction manual
EN
Press and hold the scroll wheel while powering on the transmitter to show the System Setup list. No radio transmission occurs when a
System Setup screen is displayed, preventing accidental damage to linkages and servos during changes to programming.
You can also enter the System Setup from the Function list without turning the transmitter off. A Caution screen will appear that warns
that RF will be disabled (the transmitter will no longer transmit). Press
YES
if you are sure and want to access
the System List. If you are not sure, press
NO
to exit to the main screen and continue operation.
If you do not press
YES
or
NO
, the system will exit to the main screen and continue operation within
approximately 10 seconds.
WARNING:
Do not press
YES
unless the model is turned off and secured.
SySTEM SETUP
MODEl SElECT
MODEl UTIlITIES
Model Select enables you to access any of the 250 internal model memory locations in the Model Select list.
1.
Scroll to the desired model memory in the Model Select list.
2.
When the desired model memory is highlighted, click the scroll wheel once to select the model. The
transmitter returns to the Main Screen.
3.
Add a new model by rolling to the bottom of the list. You will then be prompted with the Create New
Model screen.
CAUTION:
NEVER change the model in Model Select while operating a model. Changing the model
memory interrupts the transmitter signal to the receiver and may cause loss of vehicle control,
damage or personal injury.
In the Model Utilities function you can create a new model,delete a model, copy a model, reset a model to default
settings and sort the model list.
