background image

 Warranty Repairs

If something should occur with your washer or that requires
service please use the service locator at www.speed-
queen.com.

We would like to point out items that would not be considered
a product failure and are not covered under warranty. If a serv-
ice technician is called for the items listed below you will be re-
sponsible for payment of the service call.

• Plugged or restricted drain pipes
• Plugged or restricted water filters or fill valve screens
• Home electrical issues
• Foreign objects found inside the washer or pump
• Drain issues caused by standpipes that exceed factory

specifications

 Contact Information

If service is required, contact the nearest Factory Authorized
Service Center. To find the nearest service center, visit us on-
line at www.speedqueen.com.

If you are unable to locate an authorized service center or are
unsatisfied with the service performed on your unit, contact:

Speed Queen
Shepard Street
P.O. Box 990
Ripon, Wisconsin 54971-0990
www.speedqueen.com - select "Find Service" and enter
your zip code to find a local service company
Phone: (920)748-3121

Date Purchased

Model Number

Serial Number

TLW1851P_SVG

1

1.  Serial Plate

When contacting us about your washer, PLEASE GIVE THE
MODEL AND SERIAL NUMBERS. The model and serial num-
bers are located on the serial plate. The serial plate will be in
the location shown. Please include a copy of your bill of sale
and any service receipts you have.

If replacement parts are required, contact the source from
where you purchased your washer or visit us online at
www.speedqueen.com.

WARNING

To reduce the risk of serious injury or death, DO NOT
repair or replace any part of the unit or attempt any
servicing unless specifically recommended in the
user-maintenance instructions or in published user-
repair instructions that you understand and have the
skills to carry out.

W329

Troubleshooting

©

 Copyright, Alliance Laundry Systems LLC -

 DO NOT COPY or TRANSMIT

  33

  Part No. 203967ENR3

Summary of Contents for TR7003WN


































Reviews: