• Items should move freely through the wash water for best
cleaning results.
• When washing very large items, do not fill washtub as full
as with other loads.
Load Size - Auto Fill Water Levels
• This washer has an Auto Fill feature. It will automatically se-
lect the proper water level for the load size and type of fab-
ric that is being washed. Auto Fill is recommended for the
best wash performance in all cycles.
• Auto Fill works in multiple stages. During the first fill step of
the cycle, water will fill to the minimum level programmed
for the specific cycle selected. Once the wash step begins,
the control starts sensing the load. Once sensing is com-
plete more water may be added to optimize wash results.
• If you pause the cycle after it started, the Auto Fill sensing
stage will begin again once the cycle is resumed. It will de-
termine if any items have been added and if more water is
needed.
• Overloading the washtub can result in poor washing and
rinsing.
Load Size - Manual Water Levels
• Although the Auto Fill selection is recommended for the
best wash performance in all cycles, there are three man-
ual load size selections as well.
• The water level in your washer should fit the size of your
wash load. Small loads will use lower water levels. There
must be enough water in the washtub to allow items to
move and turn over freely.
WRONG Water Level for Size of Load
W282I_SVG
CORRECT Water Level for Size of Load
TLW2319N_SVG
• Overloading the washtub can result in poor washing and
rinsing.
IMPORTANT: If in doubt when using a manual selec-
tion, always use a larger load size. Most average loads
will require the Large Load Size setting. Failure to have
the correct volume of water relative to the load may de-
crease washer performance.
Operation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
9
Part No. 203967ENR3
Summary of Contents for TR7003WN
Page 2: ......
