SPEED LEADER LVP-1000 User Manual Download Page 30

Page: 30 / 33

Audio Switching

LVP-1000 has 3-channel audio switching, including external audio, HDMI audio, and SDI

audio. The processor can realize 3 audio switching modes, i.e. Fixed External Input, Sound

Channel Following, and Audio Off. Press the “AUDIO” key repeatedly to switch between

these 3 modes.

Fixed External Input:

The audio connection is in the External Sound Channel Input mode,

and the video is switched without changing the sound channel.

Sound Channel Following:

When the video is switched to HDMI, the sound channel outputs

HDMI audio; when the video is switched to SDI, the sound channel outputs SDI audio; when

the video is switched to V, YPbPr, VGA1, VGA2, or DVI, the sound channel outputs external

audio.

Audio Off:

Press the “AUDIO” key repeatedly to turn off audio output, and the LCD will

prompt the user of the mode of the audio.

Summary of Contents for LVP-1000


































Search results

Summary of Contents for LVP-1000

Reviews:

Related manuals for LVP-1000

Brands by name

Popular brands

SPEED LEADER LVP-1000, User Manual

Search results

Summary of Contents for LVP-1000

Reviews:

Related manuals for LVP-1000

Brands by name

Popular brands