Operation Manual
33
Default profile
: a set device parameters configured by manufacturer that cannot be changed.
Current profile
: a profile that is loaded automatically after switching the device on, after replacing the
battery or after pressing the
RST
button (
7
in Figure 1).
All user settings configured in
Voice Recorder Manager
are saved automatically to the current profile and
device memory.
Current profile is not included into any of the three user profiles.
User profile
involves user-defined parameters only. User profile can be saved and loaded by means of the
Save profile
and
Load profile
options.
You can generate up to three user profiles.
Figure 35: Saving a profile.
To create and save a profile, configure needed
parameters and click
Save profile
.
A dialog will show up (Figure 35).
Use the drop-down list to select one of the three profile names:
Profile 1
,
Profile 2
or
Profile 3
.
Click
OK
to save the profile to the device memory and apply it as a current profile.
Figure 36: Loading a profile.
To apply one of the profiles to the device, do the
following:
•
Click
Load profile
. In the dialog (Figure 36), select one of the profiles.
•
Click
OK
to confirm. The selected profile settings will be applied to the device.
If you want to change a previously created profile, you need to load this profile first to the
Voice Recorder
Manager
. To do so, click
Load profile
.
Follow the profile generation instructions described in this section above.
9.4.14
Change Password
Password is not set by default.
You can set a password to secure the access to device and its settings.
In order to set, change or disable password, click
Change password...
.
The
Change password
dialog will show up (Figure 37).