Gnome-Nano II
32
When setting the
Periodic
recording type, apart from the start date/time and duration parameters, you also
need to set the
Repetition cycle (dd:hh:mm)
: a period of time after which the device must start recording
again.
When selecting
Weekly
, apart from the start time and duration options tick days on which you want the
device to start recording.
To prevent accidental recording stop, set the timer recording priority over the recording switch. To do so, tick
the
Ignore record switch
checkbox. After doing so the recording process will be impossible to stop with the
switch button located on the device case or with the remote control.
Once all parameters are set, click
OK
to enable the timer.
To disable the timer, click
Off
.
To close the dialog without saving the changes, click
Cancel
.
If the time set for the timer matches the current time, the recording session will be enabled
immediately,
In case you set two periodic timers with the exact same parameters or if the device detects errors
while setting timer parameters, you will see the error message in the relevant area
3
of the
application main screen (Figure 18).
In the recording pauses the battery accumulates the charge. That is why, if during periodic
recording the battery discharges, audio files might be of shorter duration.
9.4.11
Multifunction Button
Figure 33: Multifunction button shortcut menu.
Use the Multifunction button shortcut menu
(Figure 33) to set one of the following options for this
button (
4
in Figure 1):
Disabled
;
Playback
(to play the last recorded audio file);
Erase
(for quick device memory formatting).
By default, the multifunction button performs recording playback.
9.4.12
LEDs Status
Figure 34: The LEDs status shortcut menu.
The
LEDs status
shortcut menu (Figure 34) is used for
enabling and disabling LED indicator located on the
device case (
6
in Figure 1).
9.4.13
Profiles
A
Profile
is a set of pre-configured device parameters that are stored in the device memory.
There are 3 types of profiles:
default profile
,
current profile
and
user profile
.