Gnome-Nano II
28
9.4.2
Signal Source
Figure 19: Signal source shortcut menu.
Source signal
shortcut menu (Figure 19) is used for
selecting recording source for the left and right
channel.
A signal can be recorded in either mono or stereo
mode.
Stereo recording involves recording onto two
separate channels, one channel for the left sound
input and the other channel for the right sound
input. Mono recording involves recording onto left
sound input only.
The range of audio sources includes the following:
Built-in microphone;
External microphone;
Line input.
To set recording signal source, click
Setup
of the shortcut menu (Figure 19).
Figure 20: Selecting signal source.
Use the
Left channel
and
Right channel
areas
to set signal sources for recording (Figure 20).
For mono recordings, tick the
Only left
channel (mono)
option.
If the signal source for both channels is not specified, the application will display the error message
in the area
3
of the main screen (Figure 18).
To apply settings to the recorder, click
ОК
.
To close the
Signal Source
dialog and cancel the current selections, click
Cancel
.
9.4.3
The Sampling Rate Area
Figure 21: The Sampling rate shortcut menu.
Use the
Sample rate
shortcut menu (Figure 21) to
select recording sampling rate: 8000, 11025, 16000,
22050, 32000 or 44100 Hz.