Speech Technology Center ANF II Operating Manual Download Page 36

Page: 36 / 80

MULTILEVEL MENU

5.5

Utilities menu

To open the

Utilities

(figure 64) select the

button in main menu.

Figure 64 – Utilities menu

The

Utilities

menu allows to perform the following operations:

Lock buttons

. Lock buttons to prevent them from being

accidentally pressed.

Empty recycle bin

. Clean the recycle bin.

Processing list

. The list of files queued for processing.

Format SD-card

. Format memory card.

Errors log

. View errors log.

Information

. View the information about the device.

To select required utility use

and

buttons. To activate a

utility, press

. Use the

MENU

button to return to the

Utilities

menu without saving any changes.

Locking buttons

Figure 65 – Utilities menu. Lock buttons

Use the

Lock buttons

utility to lock all buttons of

the device (besides the

RECORD

button) from

being accidentally pressed.

Use

and

buttons to run the utility or to

deactivate it.

Press

to save the choice.

Use the

MENU

button to return to the

Utilities

menu without saving any changes.
If buttons are locked, there will be a warning
message about it.

Cleaning recycle bin

Figure 66 – Utilities menu. Empty recycle bin

Use the

Empty recycle bin

utility to completely

delete files from the recycle bin and memory
card.

Use

and

buttons to run a utility or to

deactivate it.

Press

to save the choice.

Use the

MENU

button to return to the

Utilities

menu without saving any changes.

Summary of Contents for ANF II

















































































Search results

Summary of Contents for ANF II

Reviews:

Brands by name

Popular brands

Speech Technology Center ANF II, Operating Manual

Search results

Summary of Contents for ANF II

Reviews:

Brands by name

Popular brands