Speech Technology Center ANF II, Operating Manual

Page: 27 / 80

MULTILEVEL MENU
24
Setting stop delay
Figure 38 – Voice activation. Stop delay
Stop delay
defines the period (in ms) from the
moment when voice activation stops the
recording, till the end of the recording.
and buttons allow to select the required
parameter in a range from 500 to 10000 ms with
500 ms pitch.
Press to save the selected value of the
parameter.
Use the
MENU button to return to the Voice
activation menu without saving any changes.
5.4.3
Recorder timer menu
Recorder timer
Figure 39 – Recorder timer
In the
Recorder timer menu you can change the
following parameters of the timer:
1.
State
. Turn the timer on or off.
2. Start time . Date and time of the recording
start.
3.
Recording duration
. The duration of the
continuous record.
4.
Schedule . The schedule of the recording start.
To select the parameter use and
buttons. To open possible values of selected
parameter press .
State
Figure 40 – Recorder timer. State
State allows you to turn the timer on or off.
and buttons allow you to select the
required state.
Press to save the selected state of the timer.
If the timer is on, you will see the
icon.
Use the MENU button to return to the Recorder
timer menu without saving any changes.