0115348R3 Page 7 of 9
Floor anchoring (toe kick versions only)
1. If your Masters Lectern is equipped with a toe kick, and you wish to
attach it to the floor, the toe-kick will need to be detached from the
lectern. To detach, remove the (4) 1/4-20 x 35mm JC bolts (one on each
corner) from inside the lectern.
Figure 6
. (Save these fasteners).
2. Carefully lift the lectern off the toe kick and set aside. This will require
several people.
3.
Determine and locate the toe kick into its final position on the floor
and mark the (4) mounting hole locations on the floor. (The toe kick
mounting holes are 1/2” dia.)
4.
Drill suitable holes into the floor and anchor the toe kick with
appropriate fasteners.
5. Carefully lift the lectern back onto the toe kick and align the (4) mounting holes.
6. Re-attach the lectern to the toe kick with the previously removed JC bolts.
7. The access panel can be removed to access wiring below lectern.
Figure 6
Note: (4) fasteners are required to anchor the
toe kick to the floor. Due to the wide variety
of flooring materials and conditions possible,
anchor fasteners are not provided.
Access
panel
toe kick
Tools
Required
4mm Hex
wrench
Drill
Brake lever
Caster operation
1. To lock the caster rotation, press the brake lever.
Figure 5
.
2. To resume rotation, lift up on the brake lever.
Figure 5
Moving and parking the lectern
• Before moving, unplug and secure all power cords.
• Close and lock doors.
• Remove any items from the top of the worksurface.
• Unlock the casters.
• Push slowly and carefully. Do not move over uneven or irregular surfaces.
• Do not allow children to move.
• Lock the casters after moving.
•
Do not park unit in areas of heavy traffic.
• Do not run power cords across hallways, classrooms, or other areas
where they will be walked on.
• Do not leave unit unattended in areas where children have access.
• Keep doors closed and locked whenever unit is unattended or parked.
• Keep casters locked whenever the lectern is unattended.
(4) 1/2” mounting
holes for floor anchors
1/4-20 x 40mm JC bolt
(access from inside lectern)
4 required
