background image

Accessories

See 

spectrumfurniture.com

 for the latest

accessories and detailed warranty information.

0115348R3 Page 8 of 9

Custom-cut logo panel

(audience-side)

36.875”W x 9”H

55252

YOUR  LOGO HERE

Keyboard Drawer

with flip-down front

18.75”W x 16”D x 3.8125”H (interior height)

(max 1 per unit-keyed same as drawer and 

front door)

55247

Overbridge Insert Panel

for overbridge version only-contact Spectrum to specify cutout 

size(s) and location(s)-overbridge not available separately

(includes two 2” grommets with covers)

96507 - blank panel

96507mod - panel with cutout(s)

Adjustable Econo Keyboard Tray

18.375”W

(max 1 per unit)

95520 - standard lectern (17.75”D)

95531 - overbridge lectern (12”D)

Note: 95531 comes with a shorter 12”D 

keyboard slide and should be specified for 

overbridge version lecterns.

Note:  Lectern will accommodate (one) keyboard tray or (one) keyboard drawer.

Retractable Cord Reel

15’ [457.2 cm] retractable, 12 AWG, with breaker, 

(mounts horizontally inside lectern to base 

panel) 10 lbs [.45 kg]

99029

Note: When installed, the 

optional cord reel takes up 

3RU from the bottom of the 

rack rail.

The cord reel is intended to provide temporary access to electrical outlets for 

Spectrum mobile lecterns. Check local electrical codes prior to installation.

Summary of Contents for Masters Interactive Lectern 55250TW










Reviews: