0118857R12 Page 6 of 20
Flip-up shelf installation & operation -
optional
8-32 x 1/2” PH
thread-cutting screws
(Install lower 4 first)
Figure 5.1
XRS Elite
Lectern
Flip-up shelf
assembly
1. Extend the lectern fully to its highest position and determine which
side you prefer to mount the shelf.
2. Extend each shelf bracket to by depressing the release lever and
lifting until it locks into the 90° position.
Figure 5.1
.
3. Install the (4) lower 8-32 x 3/8” PHM screws into the side panel
leaving about 1/4” of threads exposed.
4. Set the shelf assembly onto the (4) lower screws using the
notched brackets.
5. Secure the shelf assembly by installing the (4) upper 8-32 x 3/8”
PHM screws.
6. Tighten all screws securely.
CAUTION
Keep clear of pinch points during shelf movement.
Do not exceed 35 lbs [15.9 kg] of weight on shelf.
Figure 5.2
Folding shelf
bracket
Release lever
(press here)
Operation
The shelf will automatically lock into place when lifted into the horizontal
position with the levers released.
Figure 5.2
. To lower or flip-up the shelf,
press and hold the shelf bracket levers while slowly lowering or raising the
shelf. Do not move the lectern while the shelf is in the horizontal position.
Installation video available
See www.spectrumfurniture.com
