Pallet
Figure 1
Ramp
Assembly / Setup
0118857R12 Page 2 of 20
Utility knife
1. Unloading lectern
1. Cut and remove banding using a utility knife, scissor, or other cutting tool.
2. Remove steel corners by removing screws using Phillips screwdriver.
3.
Open top of box by unfolding flaps.
4.
Remove plywood ramp from package. Place on floor next to the pallet.
Figure 1
.
This will be used to unload the lectern off the pallet.
5. Remove cardboard sleeve by lifting it up and over the lectern.
6. Remove protective shrink-wrap from lectern using a utility knife, scissor, or other
tool. Be careful not to damage the lectern when cutting shrink-wrap
7. Remove Styrofoam corner blocks.
8.
Using ramp, carefully lower the lectern off the pallet onto the floor.
Note:
Upon receiving lectern, inspect packaging for damage. To report
information regarding damages, please call 1-800-235-1262 within 5
days of receipt.
