background image

0118408 Page 8 of 16

Note:  The keyboard tray protrudes 3.4375” [8.73 cm] below the work

-

surface.  If the lectern is used for ADA use, a higher adjusted worksur-

face (around 32”H) is necessary to provide wheelchair clearance.

Keyboard Tray - 55379

• 

Tray can be installed and used as a keyboard tray or flipped and used as a 

storage drawer using pre-drilled mounting holes under the lectern worksurface.

• 

Wire management slots in tray

Dimensions:

22”W [55.9 cm] x 13.815”D [35.1 cm] x 4”H [10.2 cm]

Weight capacity:

25 lb [11.4 kg]

Shipping weight:

14 lb [5.4 kg]

Cutout required:

5.65”W [14.35 cm] x 1.65”D [4.19 cm]

Power cord:

9’ [274 cm] 14AWG *3C power cord

Power receptacles:

125V, 60hz, 15A tamper-resistant

USB charging ports: 2.1A (10.5W) (not data-compatible)

Dimensions:

6.38”W [16.2 cm] x 2.36”D [6 cm] x 3.54”H [9 cm]

Unit weight:

2 lb [.9 kg]

Shipping weight:

2.35 lb [1 kg]

Power Module - 99058

•  (2) AC power receptacles

•  (2) USB charge ports

• 

Aluminum housing and flange

•  Thumbscrew clamps

•  Requires worksurface cutout

• 

ETL-certified

•  Available in black, silver, or white

•  Customer-installed

Equipment Rack for Freedom One eLift - 55508

•  39”H (18RU) or 32”H (14RU)

•  Front and rear rack rails

•  Standard audience-side panel included

• 

Casters / glides assembled by customer

•  39”H [99.3 cm] or 32”H [81.3 cm] worksurface height (with casters)

•  Two 2” grommets in each side panel provide cord access

•  Up to two equipment racks can be attached to the lectern

(1 on left and 1 on right)

Worksurface options: •  No Cutouts

•  Custom Cutouts

•  Power Module

Base options:

•  Twin Wheel Casters

•  Glides

Door options:

•  Solid door

• 

Acrylic door

Shipping weight:

(nominal)

•  116 lb [52.7 kg] (39”H)

•  102 lb [46.3 kg] (32”H)

Freedom One eLift Lectern - 55542

• 

Electrically-adjustable worksurface

•  ADA-compliant

•  Available in surround or overbridge versions

• 

Factory-assembled with casters or glides

Lectern Style:

•  Surround

•  Overbridge

Worksurface options: •  No Cutouts

•  Custom Cutouts

Base options:

•  Twin Wheel Casters

•  Glides

Shipping weight:

(nominal)

151 lb [68.6 kg]

Summary of Contents for Freedom One eLift Lectern

















Reviews: