0118408 Page 6 of 16
The audience-side panel can be removed to access the rear portion of the equip-
ment rack.
1.
To remove the panel, gently pull the top of the panel and lift the panel
out and away from the equipment rack.
Figure 6
.
2. To reattach, align the panel with the frame and snap into place.
• Before moving, unplug and secure all power cords.
• Close and lock doors.
•
Remove any items from the top of the worksurface.
• Unlock the casters.
•
Push slowly and carefully. Do not move over uneven or irregular surfaces.
• Do not allow children to move.
• Lock the casters after moving.
•
Do not park unit in areas of heavy traffic.
•
Do not run power cords across hallways, classrooms, or other areas
where they will be walked on.
• Do not leave unit unattended in areas where children have access.
• Keep doors closed and locked whenever unit is unattended or parked.
• Keep casters locked whenever the lectern is unattended.
Figure 7
Audience-side panel
Equipment Rack
Audience-side
Actuator
Up / Down
buttons
To wall outlet
Actuator
Note:
The shroud panel can be
removed with 2 screws and /
or the worksurface extended to
access internal wiring.
Wire Loom
Wiring Diagram
Figure 6
Control Box
Removing eq. rack audience-side panel
Moving and parking the lectern
