Spectrum Industries Freedom One eLift Lectern Owner'S Manual Download Page 16

0118408 Page 16 of 16

925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729  /  800-235-1262  /  715-723-6750  /  WWW.SPECTRUMFURNITURE.COM

© 2020 Spectrum Industries Inc., All rights reserved.

Dear customer,
Spectrum Industries would like to thank you for 

your purchase.  Please take a moment to register 

your product for valuable warranty and product 

information.  Locate the product and serial num-

bers on the label located either on the inside of 

the front door, or under the main worksurface.  

Record the numbers here to enter online.
If you have any questions or concerns about the 

product you received, please contact us.

Product Number:

Serial Number:

spectrumfurniture.com/register

Learn more at:

Product Registration

1-800-235-1262 

Toll-free HELPLINE

[email protected]

Warranty

We will make it right for you!

Thanks for choosing Spectrum! Spectrum is committed to provide complete customer satisfaction. 

Each of our products is manufactured from the best materials available and each product is strin-

gently monitored throughout the production process through our P.A.C.E. program (Product Assur-

ance to meet Customer Expectations). 
We expressly warrant that Spectrum products will be of good quality and workmanship and free from 

defect for the period set out in the warranty from the date of delivery.

For a listing of all product specifi c warranty terms please visit our website at:

 https://www.spectrumfurniture.com/en/resources/purchasing-terms-warranty

Summary of Contents for Freedom One eLift Lectern

















Reviews: