background image

0118738R9 Page 13 of 17

Accessories

(Customer-installed when purchased separately)

12RU Rack Cube - 55197

•  One rack cube can be installed 

on the left or right side of the 

Media Manager Elite Lectern

•  Polyethylene slides on bottom for 

easy removal

•  Can be secured to base panel

•  Cooling fan compatible

•  Color: black

• 

Customer-installed

Rack rail:

12RU front and rear

Dimensions:

19.125”W [48.58 cm] x 19.031”D [48.34 cm] x 

21.25”H [53.97 cm]

Mounts for cooling fans:

Compatible with most 4.7” fans with 4.13” mounting 

hole spacing (12 mounting locations available)

Unit weight:

21 lb [9.5 kg]

Shipping weight:

22 lb [10 kg]

Logo area available

Customized Logo Panel - 55199

• 

Attaches to audience-side of lectern

•  Available with black, white, or matching laminate backer

• 

To get panel customized-contact Spectrum for details

• 

New logos require a first time logo charge

• 

Customer-installed

Dimensions:

30”W [76.2 cm] x 12”H [30.48 cm]

Available logo area:

28”W [71.1 cm] x 10”H [25.41 cm]

Unit weight:

6 lb [2.7 kg]

Shipping weight:

8 lb [3.6 kg]

26”D

[66 cm]

19.25”W

[48.9 cm]

7.5”H

[19 cm]

Flip-Up Shelf - 55539

•  Matching laminate

•  Shelf brackets lock into place in the upright position

• 

Includes 2” grommet

•  2 mounting heights available

• 

Available in White Chalk Dry Erase laminate.  Flip-up shelves configured 

with white laminate will have the same edgeband color as the 

worksurface and base panel.

• 

Customer-installed

Weight capacity:

35 lb [15.9 kg]

Dimensions:

19.25”W [48.9 cm] x 26”D [66 cm] x 1”H [2.54 cm]

Height positions 

available:

• 

41”H [104.1 cm] (level with worksurface)

• 

33.5”H [85.1 cm]

Note: Power and communication wiring for document cameras, laptop 

computers, and/or projectors placed on the flip-up shelf should be routed 

on top of the audience-side of the shelf.  Use of the shelf grommet hole 

for wiring will result in pinching of the cords when the shelf is folded.

Summary of Contents for Elite Lectern 55258


















Reviews: