background image

0118738R9 Page 12 of 17

Caster Operation

Figure 9

1.  Lock the brake levers to lock movement of the casters.  

(Two instructor-side casters only).  

Figure 9

.

2.  To resume operation, lift up on brake levers.

Brake lever

Skirt

Moving and Parking the Lectern

•  Before moving, unplug and secure all power cords.

•  Close and lock doors.

• 

Lower any flip-up shelves. 

•  Remove any items from the top of the worksurface.

•  Unlock the casters.

•  Push slowly and carefully.  Do not move over uneven or irregular surfaces.

•  Do not allow children to move.

•  Lock the casters after moving.

• 

Do not park unit in areas of heavy traffic.

•  Do not run power cords across hallways, classrooms, or areas where 

they will be walked on.

When lectern is unattended:

•  Do not leave in areas where children have access.

•  Keep doors closed and locked.

•  Keep casters locked.

Note: The skirt is designed to be easily removable.  It should be removed 

if the lectern will be moved over long distances or thresholds to prevent 

damage to the skirt panels.

Do not tip lectern to remove or install!

Summary of Contents for Elite Lectern 55258


















Reviews: