4' & 5' Classic
and
Hummingbird Gliders
Assembly Instructions
Base Parts List
1 - (A) Back Assembly
1 - (B) Seat Assembly
1 - (C) Head Board
2 - (D) End Piece Assembly
1 - (E) Center Cross Piece
Assembly
4 - (F) Glider Arm Assembly
2 - (G) Leg Assembly
6 - 5/16" x 41/2" Bolts
4 - 5/16" x 4" Bolts
6 - 5/16" x 31/4" Bolts
2 - 5/16" x 3" Bolts
8 - 21/2" Screws
6 - 11/2" Screws
18 - 5/16" Nuts
18 - Washers
Hardware List
INSTRUCTIONS
: *Always match numbers/letters printed on each individual piece. (1 to 1, 2 to 2, A to A, B to B, etc.)
Step 1
- Fasten
headboard to back
assembly with six 11/2"
screws.
Step 2
- Attach seat
and back assemblies
with four 31/4" bolts.
Put one in top hole
on each end and two
in center. Secure each
bolt with a washer and
nut.
Step 3
- To assemble
glider base, attach
center cross piece to
end piece assemblies
with four 41/2" bolts in
top. Insert four 4" bolts
in bottom, inserted
from bottom up. Secure
with washers and nuts.
Position back and seat
assembly to prepare
for Step 2.
Position center cross
piece and end piece
assemblies to prepare
for Step 3.
0
1
2
3
4
5
6
7
INCH
continued on back
F.
G.
E.
D.
C.
A.
B.
