INSTRUCTIONS
: *Always match numbers/letters printed on each individual piece. (1 to 1, 2 to 2, A to A, B to B, etc.)
Place your glider in your appointed spot and
enjoy relaxing on it for many years to come.
4' & 5' Classic
and
Hummingbird Gliders
Assembly Instructions
Step 4
- Remove one
washer and nut from
each end of glider
arm assembly. Attach
one end of glider arm
assembly to each
pre-drilled hole in end
piece assembly. Fasten
with washer and nut.
Step 7
- Put a 41/2"
bolt in back leg and 3
1/4" bolt in front leg.
Secure each bolt with
a washer and nut.
Step 8
- Put a 3" bolt
through armrest into
seat back. Secure each
bolt with a washer and
nut.
Step 9
- Install 21/2"
screws in each pre-
drilled hole in leg
assembly.
Step 5
- Align the other end
of glider arm assembly to
bottom holes in leg assembly.
Fasten with washer and nut.
Make sure the small
part of armrest is
pointed towards the
long end of base.
Step 6
- Slide seat
and back between
armrests.
