Micro800™ 4 Ch Universal Analog Input Module
3
Publication 0100189-04 Rev. C
Prevent Electrostatic Discharge
Electrostatic discharge can damage integrated
circuits or semiconductors if you touch bus connector
pins. Follow these guidelines when you handle the
module:
•
Touch a grounded object to discharge static
potential.
•
Wear an approved wrist-strap grounding
device.
•
Do not touch connectors or pins on
component boards.
•
Do not touch circuit components inside the
module.
•
If available, use a static-safe work station.
•
When not in use, keep the module in its
static-shield box.
To comply with the CE Low Voltage Directive (LVD),
all connected I/O must be powered from a source
compliant with the following: Safety Extra Low
Voltage (SELV) or Protected Extra Low Voltage
(PELV).
