manualshive.com logo in svg

Spectranetics CVX-300, Operator'S Manual

Share
Download
Spectranetics CVX-300 Operator'S Manual Download Page 46

46

7030-0068-26

28Jul16

Customer Service, Canada/US (719) 633-8333 / (800) 231-0978

Customer Service, 31 33 434 7050

CVX-300

® 

Excimer Laser System 

Version 26 

Operator’s Manual 

English / English

CAUTION

Anytime an extension cord is used to power the CVX-300 on a 
temporary basis, it must be a minimum 12 AWG cord of type SJO, 
SJT, SJOOW or equivalent. The power cord should be routed to 
avoid all tripping hazards and damage from other equipment. Any 
temporary extension cord must be disconnected and removed 
immediately upon completion of the task for which it was installed.

WARNING

The CVX-300 contains a Class IV laser that produces an invisible 
beam. Potentially lethal high voltages are present inside the system. 
The gas mixture utilized inside the laser contains 0.05% HCl, a 
respiratory irritant.

WARNING

Failure to service the equipment properly may result in personal 
injury or death. Service should only be completed by a Spectranetics 
Certified Field Service Engineer.

In the event that the laser has exceeded its useful life, contact Spectranetics to return the laser 
or for information regarding disposal of the equipment. See Instructions for Use for each 
single-use device for disposal of these CVX-300 accessories.

Summary of Contents for CVX-300

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands