manualshive.com logo in svg

Spectranetics CVX-300, Operator'S Manual

Share
Download
Spectranetics CVX-300 Operator'S Manual Download Page 40

40

7030-0068-26

28Jul16

Customer Service, Canada/US (719) 633-8333 / (800) 231-0978

Customer Service, 31 33 434 7050

CVX-300

® 

Excimer Laser System 

Version 26 

Operator’s Manual 

English / English

Figure 8

Standby

Standby Mode (Returning from Ready Mode)

1. 

Standby mode is entered from Ready mode by depressing the Standby button.

2. 

The  Standby button and green status light on the top of the control panel 
are illuminated.

3. 

The fluence value and pulse repetition rate appear in the display window.

4. 

The Cal OK advisory light remains illuminated. (Figure 8)

Ready Mode

1. 

Ready mode is entered from Standby mode by depressing the Ready button. (Figure 
9)

2. 

The Ready button, Cal OK light and yellow status light on the top of the control panel 
are illuminated.

3. 

The fluence value and pulse repetition rate may be changed by depressing a Fluence 
or Rate button. After a change to either value, it is not necessary to re‑calibrate.

Summary of Contents for CVX-300

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands