SpectraLink Corporation
Installation and Administration
NetLink OAI Gateway
2.
The NetLink OAI Gateway
The NetLink OAI Gateway enables third-party applications to communicate directly
with up to 10,000 NetLink Wireless Telephones, allowing users to retrieve and
respond to information using their handsets.
The NetLink OAI Gateway is available in two models and several scaled capacity
levels, please be sure that the OAI Gateway being configured has the appropriate
capacity for your implementation.
SpectraLink Model
Number
Maximum
Number of
Users
MOG600 64
MOG710 128
MOG720 256
MOG730 512
MOG740 1,024
MOG750 10,000
As shown in the diagram below, a single NetLink OAI Gateway is connected to the
site’s Local Area Network (LAN) via an Ethernet switch. The connection to the
OAI Application Server can be accomplished by a direct connect (RS-232) or
through the Ethernet connection, but may run only via one connection at a time.
During setup, the IP address of the NetLink OAI Gateway must be set. Once the IP
address is established, the Gateway can be accessed by the application server via the
RS-232 port or the LAN via telnet.
OAI
Gateway
Application
Server
(PC)
RS-232
port
RS-232
port
Alternate RS 232
cable for initial
setup
RS 232 cable
for ongoing
operation
Configuration
Terminal
(PC)
RS-232
port
LAN
Ethernet
switch
PN: 72-0078-07-B.doc
Page 8
