manualshive.com logo in svg

SpectraLink MOG600, Installation And Administration

Share
Download
SpectraLink MOG600 Installation And Administration Download Page 29

SpectraLink Corporation 

Installation and Administration  

 

NetLink OAI Gateway 

7.2

 

Telephone Line Status

*

 

In IP systems, the 

Telephone Line Status

 screen allows you to see which phones are 

actively communicating with the OAI gateway. 
From the 

System Status Menu

, select 

Telephone Line Status

. The NetLink OAI 

Gateway displays up to 16 lines. A sample screen is displayed here. Move to the next 
group of 16 by using the arrow keys. 

 

WT MAC

  The MAC address of the handset, entered at configuration. 

Name/Extension

  These fields contain the data entered at configuration. 

Phone

  

No ChkIn

 indicates the handset is not currently using the OAI function. 

ChkIn

 

indicates the handset is currently communicating with the Gateway. 
The functioning of the 

S=Search

 hotkey is described under 

Telephone Line 

Configuration

. 

                                                 

*

 In NetLink Telephony Gateway systems, this feature is accessed through the NetLink Telephony Gateway. 

PN: 72-0078-07-B.doc  

Page 29 

Summary of Contents for MOG600




































Reviews:

No comments

Brands by name

Popular brands

Load more brands