SpectraLink Corporation
Installation and Administration
NetLink OAI Gateway
Press Esc to return to the
NetLink OAI System
menu.
A handset may be associated with one and only one telephone line. The
same MAC address may not be assigned to two or more telephone lines.
The handset requires special setup which may include setting options on
the DHCP server or on the handset to allow it to communicate with the
NetLink OAI Gateway. Be sure these setting are correct. Refer to the IP
Interface document for your system.
5.5
Deleting a Handset
To delete a handset from the NetLink OAI Gateway configuration:
1.
Use the arrow keys to highlight the line to be deleted.
2.
Press D to delete the handset information.
3.
Press Y to accept changes.
4.
Press Esc to return to the
NetLink OAI System
menu.
5.6
Searching for a Handset
While in the
Telephone Line Configuration
or the
Telephone Line Status
screens, a search
hotkey is available. To search any field:
1.
Select the field to use as the search key (MAC address, Name, or Extension),
2.
Press S to display a search screen dialog box,
3.
Type an appropriate search string and then press Enter.
4.
The success or failure of the search will be displayed at the bottom of the screen.
5.
The user can either continue to change the search string for different search
criteria or escape (by pressing the Esc key) out of the search screen.
The first line of the
Telephone Line Configuration
(or
Telephone Line Status
) screen will
then display the line in which the search match was found, if any.
Successful searches always result in the first found match to show at the top of the
list, and subsequent searches will continue from that point in the list.
Note that partial strings will match for beginnings of strings, such that a search for
extension 10 will match extension 10, 100, 1000, etc., but will not match 010.
5.7
Feature Programming
*
The OAI function is accessed in the handset by pressing the
FCN
button plus a
second button. In IP systems, the button used to access the OAI feature from the
handset is configured through the
Feature Programming
option.
This setting will override any other programming.
*
In NetLink Telephony Systems, the OAI key is programmed on each NetLink Gateway. See the instructions for setting up the NetLink
Gateway for specific configuration information.
PN: 72-0078-07-B.doc
Page 23
