SpectraLink IP-DECT SERVER 400 Page 189 Installation And Configuration Manual Download

Page: 189 / 221

14215700-IG, Edition 7.0
January 2018, Original document

189

Field

Setting

Secondary Server (Optional)

Enter the IP address of the Secondary DNS server.

General Configuration - NTP

(Network Time Protocol)

Server (Optional)

Enter the IP address of the NTP server from which the system
will obtain the current time.

Time zone (Optional)

Select the wanted time zone. The time zones include daylight
saving times.

Posix timezone string (Optional)

Customized time zone setting. The string must be in POSIX
time zone format.

General Configuration - UPnP

Enabled (Optional)

Enabled by default. If enabled, the device is UPnP dis-
coverable.

UPnP is an acronym for Universal Plug and Play. If the IP
address of the device is unknown (e.g. forgotten or DHCP-
assigned), UPnP can be used to easily identify the IP address
of the device.

Note

: If

My Network Places

in Windows is setup to show

icons for networked UPnP devices, every Spectralink IP-DECT
Server, Media resource and Base station will be present in

Network Places

Broadcast announcements
(Optional)

Specifies if UPnP announcements are broadcasted.

If enabled, the device broadcasts announcements auto-
matically.

General Configuration - Remote syslog

Host (Optional)

Enter the host or IP address of the remote syslog server.

If specified, messages will be sent to the server.

Port

Server port used for remote syslog.

Default value: 514

Facility

Remote syslog facilities used for log messages.

Default value: Local 0

Refer to RFC5424.

Level

Log level to send via syslog.

Possible values:

emergency

critical

error

warning

notice

info

debug

Default value: Info

Spectralink IP-DECT Server 400/6500 Installation and Configuration Guide

Summary of Contents for IP-DECT SERVER 400






























































































































































































































Search results

Summary of Contents for IP-DECT SERVER 400

Reviews:

Related manuals for IP-DECT SERVER 400

Brands by name

Popular brands

SpectraLink IP-DECT SERVER 400, Installation And Configuration Manual

Search results

Summary of Contents for IP-DECT SERVER 400

Reviews:

Related manuals for IP-DECT SERVER 400

Brands by name

Popular brands