SpectraLink IP-DECT SERVER 400 Installation And Configuration Manual Download Page 112

Page: 112 / 221

14215700-IG, Edition 7.0
January 2018, Original document

112

Field

Setting

User - SIP

Username/Extension

Must contain information used for SIP registration etc.
E.g. the "user" in a SIP URI.

Domain (Optional)

Enter the domain part of a SIP URI.

E.g. example.org in

John Doe<sip:[email protected]>

Note

: If not configured, the default domain entered under

SIP configuration will be used.

Displayname (Optional)

Enter the name of the user (e.g. caller ID).

E.g. John Doe in

John Doe<sip:[email protected]>

Note

: If Cisco license is loaded, the Cisco Unified CM will

not use this, but it may ease the administration of users
within the Spectralink IP-DECT Server.

Authentication user (Optional)

Enter the user ID of the end user.

E.g.

JohnDoe

5208

Note

: The user name will override the Default User field

under SIP Configuration.

Priority:

1. Authentication user set for individual users

2. Authentication user set in server SIP settings

3. User name set for individual users

Authentication password
(Optional)

Enter the digest credential of the end user.

Note

: The password will override the Default Password

field under SIP Configuration.

User - Features

Call forward unconditional
(Optional)

A Call Forward Unconditional (an extension to forward
calls to) can be added/removed via the web based Admin-
istration Page.

Spectralink IP-DECT Server 400/6500 Installation and Configuration Guide

Summary of Contents for IP-DECT SERVER 400






























































































































































































































Search results

Summary of Contents for IP-DECT SERVER 400

Reviews:

SpectraLink IP-DECT SERVER 400, Installation And Configuration Manual, Page: 112 / 221

Search results

Summary of Contents for IP-DECT SERVER 400

Reviews: