SpectraLink IP-DECT SERVER 400 Installation And Configuration Manual Download Page 88

Page: 88 / 221

14215700-IG, Edition 7.0
January 2018, Original document

Configuring Media Resource Settings

Note:

Not relevant to the Spectralink IP-DECT Server 400.

To use the internal media resource, this must be enabled. To configure media resource settings from
the web based Administration Page:

1. Click

Configuration

, and then click

Media Resource

2. On the

Media Resource Configuration

page, enter the following data:

Field

Media Resource Configuration - Media resource

Enable internal

If enabled, the internal media resource will start up and
connect.

If disabled, CPU power is increased. Additional media
resource will take over then, if installed.

Default value: Enabled

3. Click

Save

Spectralink IP-DECT Server 400/6500 Installation and Configuration Guide

Summary of Contents for IP-DECT SERVER 400






























































































































































































































Search results

Summary of Contents for IP-DECT SERVER 400

Reviews:

SpectraLink IP-DECT SERVER 400, Installation And Configuration Manual, Page: 88 / 221

Search results

Summary of Contents for IP-DECT SERVER 400

Reviews: