SpectraLink IP-DECT SERVER 400 Installation And Configuration Manual Download Page 199

Page: 199 / 221

14215700-IG, Edition 7.0
January 2018, Original document

199

Field

Setting

SIP type of service (TOS/Diffserv)

TOS/Diffserv used for SIP signaling. Entered in decimal.

Default value: 96

SIP 802.1p Class-of-Service

This is the 802.1p PCP and must be between 0 and 7. The
setting requires VLAN tagging.

Default value: 3

GRUU (Optional)

If enabled, Globally Routable User Agent URIs are sup-
ported.

Default value: Enabled

Use SIPS URI (Optional)

Normally, SIP communication on a TLS connection uses the
SIPS: URI scheme.

Disabling this option causes the Wireless Server to use the
SIP: URI scheme with a transport=tls parameter for TLS con-
nections.

Default value: Enabled

TLS allow insecure (Optional)

By default, UDP and TCP transports are disabled when TLS
transport is the default. If this setting is enabled, UDP and
TCP are allowed as fallback if TLS fails.

Default value: Disabled

TCP ephemeral port in contact
address (Optional)

If enabled, the TCP ephemeral port (the local TCP port of the
outgoing connection) to the contact header, used in outgoing
SIP messages, is added.

SIP Configuration - Proxies

Proxies (Optional)

Priority

: The priority for using this proxy.

Possible Value 1-4.

Weight

: The weight for using this proxy if more proxies have

the same priority.

Possible value 1 - 65.000 higher weight gives priority.

Default value: 100

URI

: The URI or IP address of the proxy

SIP Configuration - Authentication

Default user (Optional)

Default user name used for SIP authentication.

Note

: If no handset specific authentication user name/-

password is configured, handsets registered on theSpec-
tralink IP-DECT/DECT Server will use the default user
name/password.

Spectralink IP-DECT Server 400/6500 Installation and Configuration Guide

Summary of Contents for IP-DECT SERVER 400






























































































































































































































Search results

Summary of Contents for IP-DECT SERVER 400

Reviews:

SpectraLink IP-DECT SERVER 400, Installation And Configuration Manual, Page: 199 / 221

Search results

Summary of Contents for IP-DECT SERVER 400

Reviews: