2.6.1.2
2.6.1.2
2.6.1.2
2.6.1.2
2.6.1.2
Set Minutes
Set Minutes
Set Minutes
Set Minutes
Set Minutes
The minutes digits blink and display the current minutes
value. If the value is appropriate, depress the MODE
switch to advance to the Set Seconds routine. To change
the minutes value, depress and release or hold down the
SET button to advance through the minutes variables.
When the desired minutes value is displayed, release the
SET button and depress the MODE button to advance to the
Set Seconds routine.
2.6.1.3
2.6.1.3
2.6.1.3
2.6.1.3
2.6.1.3
Set Seconds
Set Seconds
Set Seconds
Set Seconds
Set Seconds
The seconds digits blink and display the current seconds
value. If the value is appropriate, depress the MODE
switch to exit from the Manual Set procedure. Seconds are
not selected like the hours and minutes values. Depress-
ing the SET button resets the seconds to "00" and exits the
clock from the Manual Set procedure.
The clock will now run on its internal crystal timebase.
Typical accuracy is within ±2 seconds per day.
Page 2-19
