3.2
3.2
3.2
3.2
3.2
REAR P
REAR P
REAR P
REAR P
REAR PANEL FUNCTIONS
ANEL FUNCTIONS
ANEL FUNCTIONS
ANEL FUNCTIONS
ANEL FUNCTIONS
Refer to Figure 3-3 Model 8177 Rear Panel, and the
following paragraphs for information on the TimeView
400 rear panel functions.
3.2.1
3.2.1
3.2.1
3.2.1
3.2.1
RS-485 Interface
RS-485 Interface
RS-485 Interface
RS-485 Interface
RS-485 Interface
The RS-485 interface connector, shown in Figure 3-2, is a
removable six-position terminal strip. The RS-485 data
stream from a NetClock or computer are connected to Pins
1, 2 and 3 of the terminal block. Connect the non-inverted
RS-485 data line to Pin 1, the inverted data line to Pin 2,
and the cable shield to Pin 3. TimeView 400 accepts either
Data Format 0 or 1 at baud rates from 300 to 9600 from
a NetClock or 9600 baud from a computer. Refer to
Section 2.3 for NetClock connection information and
Section 2.5 for computer connection information.
+
GND
RS-485
Input/Output
RS-485
Repeater
+
GND
+
GND
FIGURE 3-2 RS-485 TERMINAL BLOCK
FIGURE 3-2 RS-485 TERMINAL BLOCK
FIGURE 3-2 RS-485 TERMINAL BLOCK
FIGURE 3-2 RS-485 TERMINAL BLOCK
FIGURE 3-2 RS-485 TERMINAL BLOCK
Page 3-3
