Spectra Precision Focus 8 Series, User Manual

Page: 4 / 70

Contact Information
Spectra Precision
10355 Westmoor Drive
Suite #100
Westminster, CO 80021
USA
+1-720-587-4700 Phone
888-477-7516 (Toll free in USA)
www.spectraprecision.com
Copyright and Trademarks
© 2007-2010, Nikon-Trimble Co. Limited. All rights reserved.
Nikon is a registered trademark of the Nikon Corporation.
Spectra Precision and Focus are registered trademarks of
Spectra Precision.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Spectra
Precision is under license.
All other trademarks are the property of their respective
owners.
It is prohibited to alter this manual in part or whole without
express permission. The contents of this manual are subject to
change without notice. Although every effort has been made
to ensure the accuracy of this manual, please contact your
dealer if you find anything in it that is incorrect or unclear.
Release Notice
This is the February 2010 (Revision A) release of the Spectra
Precision Focus 8 Series Total Station User Guide . It applies to
software release version 1.0.0 for the Focus 8 series total
station.
Manufacturer
Nikon-Trimble Co., Ltd.
Technoport Mituiseimei Bldg.
16-2, Minamikamata 2-chome, Ota-ku
Tokyo 144-0035 Japan
Notices
USA
FCC 15B Class B satisfied.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
–
–
–
–
This equipment has been certified to comply with the limits
for a Class B personal computer and peripherals, pursuant to
Subpart B of Part 15 of FCC Rules. Only peripherals (computer
input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this
equipment. Operation with non-certified personal computer
and/or peripherals is likely to result in interference to radio
and TV reception. The connection of a non-shielded
equipment interface cable to this equipment will invalidate
the FCC Certification of this device and may cause
interference levels which exceed the limits established by the
FCC for this equipment.
You are cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
European Union
EU EMC Directive satisfied.
Authorized Representative in Europe
Trimble GmbH
Am Prime Parc 11
65479 Raunheim, Germany
Canada
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Class B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
Taiwan
The product contains a removable battery.
Taiwanese regulations require that waste
batteries are recycled.
Notice to Our European Union
Customers
For product recycling instructions and more
information, please go to:
www.spectraprecision.com/ev.shtml
Recycling in Europe
To recycle Trimble WEEE,
call: +31 497 53 2430,
and ask for the “WEEE associate,”
or mail a request for recycling instructions to:
Trimble Europe BV
c/o Menlo Worldwide Logistics
Meerheide 45
5521 DZ Eersel, NL
For Bluetooth unit
USA
FCC Part 15 Subpart C/RSS-210, OET bulletin 65 supplement C
satisfied
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
–
–
–
–
Canada
RSS-210 Low Power Device
Operation is subject to the following two conditions: (1) This
device may not cause interference, and (2) this device must
accept any interference, including interference that may
cause undesired operation of the device.
European Union countries, Iceland, Norway,
Liechtenstein, Turkey, Swiss
EN300 328v1.7.1, EN50360 satisfied
Hereby, Nikon-Trimble Co., Ltd., declares that this instrument
is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Declaration of Conformity available at
http://www.nikon-
trimble.com/
RF exposure compliance